single point cam for quarter turn latch, offset in
- Stamped cams with a positioning stop prevents the cam from rotating more than 90°.
- SS strap hinges do not require plating to provide superior corrosion resistance.
- Type 302/304 stainless steel is an environmentally friendly, recyclable material.
- Cams have an 8mm. square punched hole and a height of 45mm.
- Features a 0.315" grip for an overall 0.374" offset (in/out) when used with 0.69" body length latches.
Additional Information 1
| Weight | 0.0645 lbs |
|---|---|
| Material | Stainless Steel |
| Finish | Passivated |
| Offset Type | |
| Type | |
| Industry | Enclosures/Electrical Enclosures, Enclosures/Switchgear, Marine/Watercraft / Boats |
- Stamped cams with a positioning stop prevents the cam from rotating more than 90°.
- SS strap hinges do not require plating to provide superior corrosion resistance.
- Type 302/304 stainless steel is an environmentally friendly, recyclable material.
- Cams have an 8mm. square punched hole and a height of 45mm.
- Features a 0.315" grip for an overall 0.374" offset (in/out) when used with 0.69" body length latches.
You must be logged in to post a review.
Related products
-
12C4 single point cam for quarter turn latch, straight
Steel | Zinc PlatedTypeCams and AccessoriesOffset Type -
12C6 single point cam for quarter turn latch, offset outSteel | Zinc PlatedTypeCams and AccessoriesOffset Type
-
41-04 quarter turn latch with bellcore plugDie Cast Zinc | Chrome Plated, PolishedPlug MaterialDie Cast ZincHousing MaterialDie Cast ZincPlug FinishChrome Plated, PolishedTypeQuarter TurnHousing FinishChrome Plated, Polished
-
41P-00SS quarter turn latch with slotted plugStainless Steel | Polished FacePlug Material304SS, CastHousing MaterialThermoplastic, UV StabilizedTypeQuarter TurnPlug FinishPolished FaceHousing FinishSmooth, Black
-
12C13 single point cam for quarter turn latch, offset outSteel | Zinc PlatedTypeCams and AccessoriesOffset Type
COMMONLY USED WITH
-
T130 oil tight hole sealSteel | Painted, ANSI 61 GrayOIL TIGHT SEAL, 3-1/2" CONDUIT HOLES, STEEL GREY PAINTED
-
18-50 quarter turn latch with double bitted insertDie Cast Zinc | Chrome Plated, PolishedPlug MaterialDie Cast ZincHousing MaterialDie Cast ZincPlug FinishChrome Plated, PolishedTypeQuarter TurnHousing FinishChrome Plated, Polished
Reviews
There are no reviews yet.