quarter turn latch with key locking lock plug
- Each latch includes mounting hardware, face gasket, and two ringed keys.
- Key codes are indicated on the face of the lock, unless otherwise specified.
- Keylocking latches are an excellent choice if higher level of security is needed.
- Our quarter turn latches are intended for Nema 4 or Nema 12 enclosure requirements.
- Latches include lock plugs with dust shutters for dust and water ingress protection.
- Pawls are available in either Steel or Stainless Steel, with different offsets to match your required grip or latching distan
Additional Information 1
| Weight | 0.154 lbs |
|---|---|
| Material | Die Cast Zinc |
| Plug Material | |
| Housing Material | |
| Finish | Smooth, Black |
| Type | |
| Plug Finish | |
| Housing Finish | |
| Industry | Enclosures/Electrical Enclosures, Enclosures/Switchgear |
- Each latch includes mounting hardware, face gasket, and two ringed keys.
- Key codes are indicated on the face of the lock, unless otherwise specified.
- Keylocking latches are an excellent choice if higher level of security is needed.
- Our quarter turn latches are intended for Nema 4 or Nema 12 enclosure requirements.
- Latches include lock plugs with dust shutters for dust and water ingress protection.
- Pawls are available in either Steel or Stainless Steel, with different offsets to match your required grip or latching distan
You must be logged in to post a review.
Related products
-
19 quarter turn latch with handle lever
Plastic | Smooth, BlackPlug MaterialThermoplastic, UV StabilizedHousing MaterialThermoplastic, UV StabilizedPlug FinishSmooth, BlackTypeQuarter TurnHousing FinishSmooth, Black -
12C12 single point cam for quarter turn latch, offset outSteel | Zinc PlatedTypeCams and AccessoriesOffset Type
-
12C11 single point cam for quarter turn latch, offset outSteel | Zinc PlatedTypeCams and AccessoriesOffset Type
-
12C8 single point cam for quarter turn latch, straightSteel | Zinc PlatedTypeCams and AccessoriesOffset Type
-
12C3 single point cam for quarter turn latch, offset outSteel | Zinc PlatedTypeCams and AccessoriesOffset Type
COMMONLY USED WITH
-
E224 shoulder eye boltSteel | MillTypeShoulder Pattern
-
T124 oil tight hole sealSteel | Painted, ANSI 61 GrayOIL TIGHT SEAL, 2" CONDUIT HOLES, STEEL GREY PAINTED
-
12C1SS single point cam for quarter turn latch, offset inStainless Steel | PassivatedTypeCams and AccessoriesOffset Type
-
179P-10 large print pocket with stronger adhesivePolystyrene | Gray, ANSI 61SizeLargeDouble Sided TapeWith Tape
Reviews
There are no reviews yet.