single point cam for quarter turn latch, offset in
- Stamped cams with a positioning stop prevents the cam from rotating more than 90°.
- SS strap hinges do not require plating to provide superior corrosion resistance.
- Type 302/304 stainless steel is an environmentally friendly, recyclable material.
- Cams have an 8mm. square punched hole and a height of 45mm.
- Features a 0.551" grip for an overall 0.138" offset (in/out) when used with 0.69" body length latches.
Additional Information 1
| Weight | 0.055 lbs |
|---|---|
| Material | Stainless Steel |
| Finish | Passivated |
| Offset Type | |
| Type | |
| Industry | Enclosures/Electrical Enclosures, Enclosures/Switchgear, Marine/Watercraft / Boats |
- Stamped cams with a positioning stop prevents the cam from rotating more than 90°.
- SS strap hinges do not require plating to provide superior corrosion resistance.
- Type 302/304 stainless steel is an environmentally friendly, recyclable material.
- Cams have an 8mm. square punched hole and a height of 45mm.
- Features a 0.551" grip for an overall 0.138" offset (in/out) when used with 0.69" body length latches.
You must be logged in to post a review.
Related products
-
41-00SS quarter turn latch with slotted arrow plug
Stainless Steel | Polished FacePlug Material304SS, CastHousing Material304SS, CastTypeQuarter TurnPlug FinishPolished FaceHousing FinishPolished Face -
12C6 single point cam for quarter turn latch, offset outSteel | Zinc PlatedOffset TypeTypeCams and Accessories
-
12C13 single point cam for quarter turn latch, offset outSteel | Zinc PlatedOffset TypeTypeCams and Accessories
-
12C1 single point cam for quarter turn latch, offset inSteel | Zinc PlatedTypeCams and AccessoriesOffset Type
-
41-04SS quarter turn latch with bellcore plugStainless Steel | Polished FacePlug Material304SS, CastHousing Material304SS, CastTypeQuarter TurnPlug FinishPolished FaceHousing FinishPolished Face
COMMONLY USED WITH
-
T120-07 oil tight hole seal
Steel | Textured Powder Coated GrayOIL TIGHT SEAL, 1-1/4" CONDUIT HOLES, STEEL, RAL 7035 TEXTURED POWDER COATED, ZINC PLATED CAP, INDIVIDUALLY POLYBAGGED -
E203 shoulder eye boltSteel, Forged | MillTypeShoulder Pattern
-
14 quarter turn latch with square insertDie Cast Zinc | Chrome Plated, PolishedPlug MaterialDie Cast ZincHousing MaterialDie Cast ZincPlug FinishChrome Plated, PolishedTypeQuarter TurnHousing FinishChrome Plated, Polished
Reviews
There are no reviews yet.