Stamped cams with a positioning stop prevents the cam from rotating more than 90°.
Zinc plated steel material provides suitable corrosion protection for the inside of a door or panel.
Cams have an 8mm. square punched hole and a height of 45mm.
Features a 1.181″ grip for an overall 0.492″ offset (in/out) when used with 0.69″ body length latches.
single point cam for quarter turn latch, offset out
- Stamped cams with a positioning stop prevents the cam from rotating more than 90°.
- Zinc plated steel material provides suitable corrosion protection for the inside of a door or panel.
- Cams have an 8mm. square punched hole and a height of 45mm.
- Features a 1.181" grip for an overall 0.492" offset (in/out) when used with 0.69" body length latches.
Additional Information 1
| Weight | 0.0682 lbs |
|---|---|
| Material | Steel |
| Finish | Zinc Plated |
| Type | |
| Offset Type | |
| Industry | Enclosures/Electrical Enclosures, Enclosures/Switchgear |
- Stamped cams with a positioning stop prevents the cam from rotating more than 90°.
- Zinc plated steel material provides suitable corrosion protection for the inside of a door or panel.
- Cams have an 8mm. square punched hole and a height of 45mm.
- Features a 1.181" grip for an overall 0.492" offset (in/out) when used with 0.69" body length latches.
You must be logged in to post a review.
Related products
-
12C5 single point cam for quarter turn latch, offset out
Steel | Zinc PlatedOffset TypeTypeCams and Accessories -
19 quarter turn latch with handle leverPlastic | Smooth, BlackPlug MaterialThermoplastic, UV StabilizedHousing MaterialThermoplastic, UV StabilizedPlug FinishSmooth, BlackTypeQuarter TurnHousing FinishSmooth, Black
-
12C6 single point cam for quarter turn latch, offset outSteel | Zinc PlatedOffset TypeTypeCams and Accessories
-
12 quarter turn latch with slotted plugDie Cast Zinc | Chrome Plated, PolishedPlug MaterialDie Cast ZincHousing MaterialDie Cast ZincPlug FinishChrome Plated, PolishedTypeQuarter TurnHousing FinishChrome Plated, Polished
-
12C8 single point cam for quarter turn latch, straightSteel | Zinc PlatedOffset TypeTypeCams and Accessories
COMMONLY USED WITH
-
177P small print pocketPolystyrene | Gray, ANSI 61SizeSmallDouble Sided TapeWith Tape
-
E209SS shoulder eye bolt304 Stainless Steel | PassivatedTypeShoulder Pattern
-
41-19CH quarter turn latch with thumb turn knob plugDie Cast Zinc | Chrome Plated, PolishedPlug MaterialDie Cast ZincHousing MaterialDie Cast ZincTypeQuarter TurnPlug FinishChrome Plated, PolishedHousing FinishChrome Plated, Polished
-
T124-10 oil tight hole sealSteel | Powder Coat, ANSI 61 Textured GrayOIL TIGHT SEAL, 2" CONDUIT HOLES, STEEL, TEXTURE GREY POWDER COATED
Reviews
There are no reviews yet.