5/8 [16mm] key locking cam lock
- Grip or Latching Distance is determined by Housing Length and Cam Offset.
- Recommended panel cutout varies, depending on panel material.
- Latching distance is the distance between the outside mounting surface and the inside face of the cam after installation.
- Cam Locks include two ringed keys, body nut and cam mounting screw.
- Cams to be purchased separately.
- Standard camlocks are set at Rotation A, which means the key is inserted at the top, and rotates 90 degrees to the right.
Additional Information 1
| Weight | 0.104 lbs |
|---|---|
| Material | Die Cast Zinc |
| Length | |
| Finish | Brass Plated |
| Key Code | |
| Cam Fastener | |
| Rotation | |
| Industry | Enclosures/Exhibits / Kiosks / Displays, Specialty/Trash / Laundry Chutes |
- Grip or Latching Distance is determined by Housing Length and Cam Offset.
- Recommended panel cutout varies, depending on panel material.
- Latching distance is the distance between the outside mounting surface and the inside face of the cam after installation.
- Cam Locks include two ringed keys, body nut and cam mounting screw.
- Cams to be purchased separately.
- Standard camlocks are set at Rotation A, which means the key is inserted at the top, and rotates 90 degrees to the right.
You must be logged in to post a review.
Related products
-
K04ISS---003 5/8 [16mm] key locking cam lock
Die Cast Zinc | SS Face and PlugLength5/8 -
K04TSS---006 1 1/8 [28mm] key locking cam lockDie Cast Zinc | SS Face and PlugLength1-1/8
-
K04ISS---002 5/8 [16mm] key locking cam lockDie Cast Zinc | SS Face and PlugLength5/8
-
K04TCP---001 1 1/8 [28mm] key locking cam lockDie Cast Zinc | Chrome PlatedLength1-1/8
-
K04ISS---006 5/8 [16mm] key locking cam lockDie Cast Zinc | SS Face and PlugLength5/8
Reviews
There are no reviews yet.