Stainless steel Covers have a Brushed finish.
Each oil tight seal comes with all components packaged in a bag, ready for installation.
Hole seals are available to cover holes ranging from less than 0.25″ up to 4.00″.
Each set includes the Cover with weld stud, gasket, back plate and wing nut.
Our Hole seal sets are available in a variety of materials and finishes.
oil tight hole seal
- Stainless steel Covers have a Brushed finish.
- Each oil tight seal comes with all components packaged in a bag, ready for installation.
- Hole seals are available to cover holes ranging from less than 0.25" up to 4.00".
- Each set includes the Cover with weld stud, gasket, back plate and wing nut.
- Our Hole seal sets are available in a variety of materials and finishes.
Additional Information 1
| Weight | 0.052 lbs |
|---|---|
| Material | 316SS |
| Finish | Brushed |
| Industry | Enclosures/Electrical Enclosures, Enclosures/Switchgear, Specialty/Clean Rooms, Specialty/Medical |
- Stainless steel Covers have a Brushed finish.
- Each oil tight seal comes with all components packaged in a bag, ready for installation.
- Hole seals are available to cover holes ranging from less than 0.25" up to 4.00".
- Each set includes the Cover with weld stud, gasket, back plate and wing nut.
- Our Hole seal sets are available in a variety of materials and finishes.
You must be logged in to post a review.
Related products
-
T120 oil tight hole seal
Steel | Painted, ANSI 61 GrayOIL TIGHT SEAL, 1-1/4" CONDUIT HOLES, STEEL GREY PAINTED -
T132 oil tight hole sealSteel | Painted, ANSI 61 GrayOIL TIGHT SEAL, 4" CONDUIT HOLES, STEEL GREY PAINTED
-
T128SS oil tight hole sealStainless Steel | BrushedOIL TIGHT SEAL, 3" CONDUIT HOLES, STAINLESS STEEL BRUSHED
-
T132SS oil tight hole sealStainless Steel | BrushedOIL TIGHT SEAL, 4" CONDUIT HOLES, STAINLESS STEEL BRUSHED
-
T124 oil tight hole sealSteel | Painted, ANSI 61 GrayOIL TIGHT SEAL, 2" CONDUIT HOLES, STEEL GREY PAINTED
COMMONLY USED WITH
-
744A-27.6 connecting rodSteel | Zinc PlatedTypeRods and Rod Guides
-
E221SS shoulder eye bolt304 Stainless Steel | PassivatedTypeShoulder Pattern
-
12C64 single point cam for quarter turn latch, offset out
Steel | Zinc PlatedTypeCams and AccessoriesOffset Type -
41P-08 quarter turn latch with thumb turn knob plugPlastic | Smooth, BlackPlug MaterialThermoplastic, UV StabilizedHousing MaterialThermoplastic, UV StabilizedPlug FinishSmooth, BlackTypeQuarter TurnHousing FinishSmooth, Black
Reviews
There are no reviews yet.