Oil Tight Hole seals are used to seal conduits, knockout holes and other openings from dust, water, dirt and oil.
Hole seals are available to cover holes ranging from less than 0.25″ up to 4.00″.
Each set includes the Cover with weld stud, gasket, back plate and wing nut.
Each oil tight seal comes with all components packaged in a bag, ready for installation.
Wall thickness on enclosures cannot exceed 0.31″ to use any hole seal kit.
oil tight hole seal
- Oil Tight Hole seals are used to seal conduits, knockout holes and other openings from dust, water, dirt and oil.
- Hole seals are available to cover holes ranging from less than 0.25" up to 4.00".
- Each set includes the Cover with weld stud, gasket, back plate and wing nut.
- Each oil tight seal comes with all components packaged in a bag, ready for installation.
- Wall thickness on enclosures cannot exceed 0.31" to use any hole seal kit.
Additional Information 1
| Weight | 0.079 lbs |
|---|---|
| Material | Steel |
| Finish | Powder Coat, ANSI 61 Textured Gray |
| Industry | Enclosures/Electrical Enclosures, Enclosures/Switchgear |
- Oil Tight Hole seals are used to seal conduits, knockout holes and other openings from dust, water, dirt and oil.
- Hole seals are available to cover holes ranging from less than 0.25" up to 4.00".
- Each set includes the Cover with weld stud, gasket, back plate and wing nut.
- Each oil tight seal comes with all components packaged in a bag, ready for installation.
- Wall thickness on enclosures cannot exceed 0.31" to use any hole seal kit.
You must be logged in to post a review.
Related products
-
T128 oil tight hole seal
Steel | Painted, ANSI 61 GrayOIL TIGHT SEAL, 3" CONDUIT HOLES, STEEL GREY PAINTED -
T110 oil tight hole sealSteel | Painted, ANSI 61 GrayOIL TIGHT SEAL, MINIATURE PUSH BUTTON, STEEL GREY PAINTED
-
T112 oil tight hole sealSteel | Painted, ANSI 61 GrayOIL TIGHT SEAL, STANDARD PUSH BUTTON, STEEL GREY PAINTED
-
T110SS oil tight hole sealStainless Steel | BrushedOIL TIGHT SEAL, MINIATURE PUSH BUTTON, STAINLESS STEEL BRUSHED
-
T124SS-10 oil tight hole sealStainless Steel | BrushedOIL TIGHT SEAL, 2" CONDUIT HOLES, ALL COMPONENTS IN STAINLESS STEEL, BRUSHED FINISH CAP
COMMONLY USED WITH
-
12C61 three point cam with rod adaptersSteel | Zinc PlatedTypeCams and AccessoriesOffset Type
-
E121 plain eye boltSteel, Forged | MillTypePlain Pattern
-
41P-04SS quarter turn latch with bellcore plugStainless Steel | Polished FacePlug Material304SS, CastHousing MaterialThermoplastic, UV StabilizedPlug FinishPolished FaceTypeQuarter TurnHousing FinishSmooth, Black
-
744-19.7 connecting rodSteel | Zinc PlatedTypeRods and Rod Guides
-
J2088SS enclosure hinge kit for nema / jic enclosuresStainless Steel | MillTypeTake Apart
Reviews
There are no reviews yet.