oil tight hole seal
Oil Tight Hole seals are used to seal conduits, knockout holes and other openings from dust, water, dirt and oil.
Hole seals are available to cover holes ranging from less than 0.25″ up to 4.00″.
Each set includes the Cover with weld stud, gasket, back plate and wing nut.
The Cap and Gasket are placed outside of the enclosure, with the back plate and wing nut positioned on the inside.
Each oil tight seal comes with all components packaged in a bag, ready for installation.
Additional information
| Weight | 0.047 lbs |
|---|---|
| Material | 316SS |
| Finish | Brushed |
| Industry | Enclosures/Electrical Enclosures, Enclosures/Switchgear, Specialty/Clean Rooms, Specialty/Medical |
- Oil Tight Hole seals are used to seal conduits, knockout holes and other openings from dust, water, dirt and oil.
- Hole seals are available to cover holes ranging from less than 0.25" up to 4.00".
- Each set includes the Cover with weld stud, gasket, back plate and wing nut.
- The Cap and Gasket are placed outside of the enclosure, with the back plate and wing nut positioned on the inside.
- Each oil tight seal comes with all components packaged in a bag, ready for installation.
You must be logged in to post a review.
Related products
-
T120 oil tight hole seal
Steel | Painted, ANSI 61 GrayOIL TIGHT SEAL, 1-1/4" CONDUIT HOLES, STEEL GREY PAINTED -
T120SS oil tight hole sealStainless Steel | BrushedOIL TIGHT SEAL, 1-1/4" CONDUIT HOLES, STAINLESS STEEL BRUSHED
-
T132 oil tight hole sealSteel | Painted, ANSI 61 GrayOIL TIGHT SEAL, 4" CONDUIT HOLES, STEEL GREY PAINTED
-
T130SS oil tight hole sealStainless Steel | BrushedOIL TIGHT SEAL, 3-1/2" CONDUIT HOLES, STAINLESS STEEL BRUSHED
-
T118SS oil tight hole sealStainless Steel | BrushedOIL TIGHT SEAL, 1" CONDUIT HOLES, STAINLESS STEEL BRUSHED
COMMONLY USED WITH
-
41-02BK quarter turn latch with recessed hex plugDie Cast Zinc | Smooth, BlackPlug MaterialDie Cast ZincHousing MaterialDie Cast ZincPlug FinishSmooth, BlackTypeQuarter TurnHousing FinishSmooth, Black
-
X123SS nema / jic enclosure hinge leafStainless Steel | MillTypeTake Apart
-
KH38BK finger pull for quarter turn latchesNylon | Powder Coat, Black TexturedTypeCams and Accessories
-
12C67 single point cam for quarter turn latch, offset out
Steel | Zinc PlatedOffset TypeTypeCams and Accessories -
E142 plain eye boltSteel, Forged | MillTypePlain Pattern
Reviews
There are no reviews yet.