Stainless steel Covers have a Brushed finish.
Economy, premium and 316 stainless steel versions are available.
Hole seals are available to cover holes ranging from less than 0.25″ up to 4.00″.
Each set includes the Cover with weld stud, gasket, back plate and wing nut.
The Cap and Gasket are placed outside of the enclosure, with the back plate and wing nut positioned on the inside.
oil tight hole seal
- Stainless steel Covers have a Brushed finish.
- Economy, premium and 316 stainless steel versions are available.
- Hole seals are available to cover holes ranging from less than 0.25" up to 4.00".
- Each set includes the Cover with weld stud, gasket, back plate and wing nut.
- The Cap and Gasket are placed outside of the enclosure, with the back plate and wing nut positioned on the inside.
Additional Information 1
| Weight | 0.5846 lbs |
|---|---|
| Material | Stainless Steel |
| Finish | Powder Coat, ANSI 61 Textured Gray |
| Industry | Enclosures/Electrical Enclosures, Enclosures/Switchgear |
- Stainless steel Covers have a Brushed finish.
- Economy, premium and 316 stainless steel versions are available.
- Hole seals are available to cover holes ranging from less than 0.25" up to 4.00".
- Each set includes the Cover with weld stud, gasket, back plate and wing nut.
- The Cap and Gasket are placed outside of the enclosure, with the back plate and wing nut positioned on the inside.
You must be logged in to post a review.
Related products
-
T126SS oil tight hole seal
Stainless Steel | BrushedOIL TIGHT SEAL, 2-1/2" CONDUIT HOLES, STAINLESS STEEL BRUSHED -
T110 oil tight hole sealSteel | Painted, ANSI 61 GrayOIL TIGHT SEAL, MINIATURE PUSH BUTTON, STEEL GREY PAINTED
-
T128SS oil tight hole sealStainless Steel | BrushedOIL TIGHT SEAL, 3" CONDUIT HOLES, STAINLESS STEEL BRUSHED
-
T120SS oil tight hole sealStainless Steel | BrushedOIL TIGHT SEAL, 1-1/4" CONDUIT HOLES, STAINLESS STEEL BRUSHED
-
T116SS oil tight hole sealStainless Steel | BrushedOIL TIGHT SEAL, 3/4" CONDUIT HOLES, STAINLESS STEEL BRUSHED
COMMONLY USED WITH
-
18BK-50 quarter turn latch with double bitted insertDie Cast Zinc | Smooth, BlackPlug MaterialDie Cast ZincHousing MaterialDie Cast ZincTypeQuarter Turn
-
12C23 single point cam for quarter turn latch, offset outSteel | Zinc PlatedTypeCams and AccessoriesOffset Type
-
E227ZN shoulder eye boltSteel, Forged | Zinc Plated, ClearTypeShoulder Pattern
Reviews
There are no reviews yet.