thumb turn wing knob cam lock
- Grip or Latching Distance is determined by Housing Length and Cam Offset.
- Recommended panel cutout varies, depending on panel material.
- Latching distance is the distance between the outside mounting surface and the inside face of the cam after installation.
- Knob activated locks include body nut and cam mounting screw.
- Cams to be purchased separately.
- 1-1/8" long die cast twist latch with 90-degree rotation
- If mounting on metal panel, standard body nut or mounting clip will suffice.
Additional Information 1
| Weight | 0.139 lbs |
|---|---|
| Material | Die Cast Zinc |
| Finish | Chrome Plated |
| Industry | Enclosures/Exhibits / Kiosks / Displays, Specialty/Trash / Laundry Chutes, Specialty/Woodworking |
- Grip or Latching Distance is determined by Housing Length and Cam Offset.
- Recommended panel cutout varies, depending on panel material.
- Latching distance is the distance between the outside mounting surface and the inside face of the cam after installation.
- Knob activated locks include body nut and cam mounting screw.
- Cams to be purchased separately.
- 1-1/8" long die cast twist latch with 90-degree rotation
- If mounting on metal panel, standard body nut or mounting clip will suffice.
You must be logged in to post a review.
Related products
-
K03PCP04 tubular cam lock
Brass | Chrome PlatedBRASS TUBULAR CAMLOCK, 1.169" BODY LENGTH, 2-KEYS, 90 DEG ROTATION, NO CAM, SCREW ON BODY NUT, CHROME PLATED -
K206CP02 tubular cam lockDie Cast Zinc | Chrome PlatedMINI TUBULAR CAM LOCK, CHROME PLATED, 7 PIN TUMBLER, .472 HOUSING, .226 SHAFT, WITH BODY NUT, 2 RING KEYS
-
K06I cam lock with recessed hex plugDie Cast Zinc | Chrome PlatedCAMLOCK,5/8,CP ALLEN,ROT?,????,???CAM -
2-15CH key locking push to close bolt latchDie Cast Zinc | Chrome PlatedTypeSlam
-
K50ICP---001 quarter turn cam latch with thumb turnDie Cast Zinc | Chrome PlatedTHUMB LATCH, CHROME PLATED-5/8"-NO CAM-ROT C-HEX NUT-POLYBAGGED-
Reviews
There are no reviews yet.