7/16 [11mm] key locking cam lock
- Grip or Latching Distance is determined by Housing Length and Cam Offset.
- Recommended panel cutout varies, depending on panel material.
- Latching distance is the distance between the outside mounting surface and the inside face of the cam after installation.
- Cam Locks include two ringed keys and body nut.
- Cams are installed by spinning.
- Cams to be purchased separately.
- Standard camlocks are single bitted, with double bitted locks available as a custom option.
Additional Information 1
| Weight | 0.087 lbs |
|---|---|
| Material | Die Cast Zinc |
| Length | |
| Key Code | |
| Finish | SS Face and Plug |
| Cam Fastener | |
| Rotation | |
| Industry | Enclosures/Exhibits / Kiosks / Displays, Specialty/Trash / Laundry Chutes |
- Grip or Latching Distance is determined by Housing Length and Cam Offset.
- Recommended panel cutout varies, depending on panel material.
- Latching distance is the distance between the outside mounting surface and the inside face of the cam after installation.
- Cam Locks include two ringed keys and body nut.
- Cams are installed by spinning.
- Cams to be purchased separately.
- Standard camlocks are single bitted, with double bitted locks available as a custom option.
You must be logged in to post a review.
Related products
-
K04TSS---006 1 1/8 [28mm] key locking cam lock
Die Cast Zinc | SS Face and PlugLength1-1/8 -
K04BSS---002 11/32 [9mm] key locking cam lockDie Cast Zinc | SS Face and PlugLength11/32
-
K04TSS---003 1 1/8 [28mm] key locking cam lockDie Cast Zinc | SS Face and PlugLength1-1/8
-
K04ISS---001 5/8 [16mm] key locking cam lockDie Cast Zinc | SS Face and PlugLength5/8
-
K04ISS---003 5/8 [16mm] key locking cam lockDie Cast Zinc | SS Face and PlugLength5/8
Reviews
There are no reviews yet.