single point cam for quarter turn latch, offset out
- Stamped cams with a positioning stop prevents the cam from rotating more than 90°.
- Zinc plated steel material provides suitable corrosion protection for the inside of a door or panel.
- Cams have an 8mm. square punched hole and a height of 45mm.
- Features a 1.181" grip for an overall 0.492" offset (in/out) when used with 0.69" body length latches.
Additional Information 1
| Weight | 0.0682 lbs |
|---|---|
| Material | Steel |
| Finish | Zinc Plated |
| Type | |
| Offset Type | |
| Industry | Enclosures/Electrical Enclosures, Enclosures/Switchgear |
- Stamped cams with a positioning stop prevents the cam from rotating more than 90°.
- Zinc plated steel material provides suitable corrosion protection for the inside of a door or panel.
- Cams have an 8mm. square punched hole and a height of 45mm.
- Features a 1.181" grip for an overall 0.492" offset (in/out) when used with 0.69" body length latches.
You must be logged in to post a review.
Related products
-
41-04BK quarter turn latch with bellcore plug
Die Cast Zinc | Smooth, BlackPlug MaterialDie Cast ZincHousing MaterialDie Cast ZincPlug FinishSmooth, BlackTypeQuarter TurnHousing FinishSmooth, Black -
41-00BK quarter turn latch with slotted arrow plugDie Cast Zinc | Smooth, BlackPlug MaterialDie Cast ZincHousing MaterialDie Cast ZincPlug FinishSmooth, BlackTypeQuarter TurnHousing FinishSmooth, Black
-
12C13 single point cam for quarter turn latch, offset outSteel | Zinc PlatedTypeCams and AccessoriesOffset Type
-
12C11 single point cam for quarter turn latch, offset outSteel | Zinc PlatedTypeCams and AccessoriesOffset Type
-
41-04SS quarter turn latch with bellcore plugStainless Steel | Polished FacePlug Material304SS, CastHousing Material304SS, CastTypeQuarter TurnPlug FinishPolished FaceHousing FinishPolished Face
COMMONLY USED WITH
-
E209SS shoulder eye bolt304 Stainless Steel | PassivatedTypeShoulder Pattern
-
177P small print pocketPolystyrene | Gray, ANSI 61SizeSmallDouble Sided TapeWith Tape
-
T124-10 oil tight hole sealSteel | Powder Coat, ANSI 61 Textured GrayOIL TIGHT SEAL, 2" CONDUIT HOLES, STEEL, TEXTURE GREY POWDER COATED
-
41-19CH quarter turn latch with thumb turn knob plugDie Cast Zinc | Chrome Plated, PolishedPlug MaterialDie Cast ZincHousing MaterialDie Cast ZincTypeQuarter TurnPlug FinishChrome Plated, PolishedHousing FinishChrome Plated, Polished
Reviews
There are no reviews yet.