quarter turn cam latch with thumb turn
- Grip or Latching Distance is determined by Housing Length and Cam Offset.
- Recommended panel cutout varies, depending on panel material.
- Latching distance is the distance between the outside mounting surface and the inside face of the cam after installation.
- Knob activated locks include body nut and cam mounting screw.
- Cams to be purchased separately.
Additional Information 1
| Weight | 0.106 lbs |
|---|---|
| Material | Die Cast Zinc |
| Finish | Chrome Plated |
| Industry | Enclosures/Exhibits / Kiosks / Displays, Specialty/Trash / Laundry Chutes |
- Grip or Latching Distance is determined by Housing Length and Cam Offset.
- Recommended panel cutout varies, depending on panel material.
- Latching distance is the distance between the outside mounting surface and the inside face of the cam after installation.
- Knob activated locks include body nut and cam mounting screw.
- Cams to be purchased separately.
You must be logged in to post a review.
Related products
-
K03PCP06 tubular cam lock
Brass | Chrome PlatedBRASS TUBULAR CAMLOCK, .433" BODY LENGTH, 2-KEYS, 90 DEG ROTATION, NO CAM, SCREW ON BODY NUT, CHROME PLATED -
K10OCP---001 thumb turn wing knob cam lockDie Cast Zinc | Chrome PlatedCP LATCH-7/8-NO CAM-ROTATION A, SCREW ON-HEXNUT-BULK-
-
K10ICP---001 thumb turn wing knob cam lockDie Cast Zinc | Chrome PlatedCP LATCH-5/8-NO CAM-ROTATION A, SCREW ON-HEXNUT-BULK-
-
5901 padlockable cylindrical lockDie Cast Zinc | Brass PlatedBRASS PLATED PADLOCKABLE CYLINDER W\OFFSET CAM TRIM RING,NUT,SCREW, AND NYLON INSERT LOCK NUT
-
K05ICP50 push and turn cylindrical lockDie Cast Zinc | Chrome PlatedPUSH AND TURN KNOB CAM LOCK, CHROME PLATED
Reviews
There are no reviews yet.